pix4d-blog-accuracy-web

Are you getting the accuracy you expect in Pix4Dmapper?

“What is the accuracy I can achieve with Pix4Dmapper?" is the most common question we’ve received since developing the software.

Accuracy is also the major concern for people who work in surveying and geospatial industries.

This article will share some useful information regarding questions you may have: What overlap settings should I go with in order to get a better result? How do I know what the accuracy of my mapping outputs are? How can I improve the accuracy of my projects?

How does overlap affect accuracy?

But, first: What is accuracy in an aerial mapping project?

To explore how overlap affects accuracy, we compared the results generated from datasets with different image overlaps.

To ensure the results were as consistent as possible, we took one dataset as a control and altered the image overlap. Creating different overlap projects by taking images out allows us to keep most factors consistent and obtain a reliable result.

The original dataset was acquired by our Phantom 4 Pro with Pix4Dcapture. 21 points were surveyed using RTK method with a Triumph-LS. Five of them were used as ground control points (GCPs), and the rest were used as check points for examining the results from Pix4Dmapper. Adjacent images have 95% frontlap and 90% sidelap. All datasets have a ground sampling distance (GSD) of around 2.9 cm.

In order to know if the image overlap has an impact on accuracy, we compare the following three projects (which we will call Skip 0, Skip 3, and Skip 5):

illustration of a dataset with 95% overlap
illustration of a dataset only two of seven images selected for an 80% overlap
illustration of a dataset five images skipped over for an 73% overlap
Illustration of datasets with 95% overlap (first image), 80% (second image) and 73% (third image).

*Skip 0* is the project using the original dataset, *Skip 3* is the project created with one image selected out of four, and *Skip 5* was created with one image selected out of six.

In other words, the three datasets will have approximately 95%, 80%, and 73.5% of image overlap, respectively.

We'll talk more about the results later. For now, let's move on to...

Baseline and height flight ratio


What is the base-height ratio?
In traditional photogrammetry theory, the vertical accuracy is relative to base-height ratio: the ratio of baseline and flying height. The term baseline refers to the distance between two camera positions.

For the same flying height, shorter baseline (or more overlap) pairs intersect a 3D point at a more acute angle. A more acute angle will give you bigger errors in the vertical direction: one pixel of horizontal error will induce a vertical error of tan(90°-X/2) pixels, where X is the intersection angle in degrees.

The following diagram compares wide and short baselines. The intersection angle is marked in green.

Illustration of a wide baseline. The intersection angle is about 90 degrees.
Illustration of a narrow baseline. The intersection angle is around 45 degrees
Difference between wide (left image) and short (right image) baselines.

However, more image overlap will give the software more information for the transition.

For example, matches not able to be found from a 60%-overlap image pair are probably going to be detected with more images taken between the pair.

So wide-baseline pairs give you better accuracy but short-baseline pairs increase the possibility of finding more matches.

Now the question is, is Pix4Dmapper powerful enough to find as many valid matches as possible, while taking into consideration that the matches were generated from different base-height ratios to ensure the best possible vertical accuracy? To answer this question, we proposed a standard workflow for quality assessment.

Standard workflow for quality assessment

In order to achieve the maximum quality assessment, we have prepared these 5 tips on how to increase the accuracy of your drone mapping projects, and the following workflow:

1. Import images and the GCPs, making sure they are marked on the wide-baseline pairs

To know if your marks included the wide-baseline pairs. Check the error ellipsoid!

In Pix4Dmapper rayCloud, you may activate the display of *error ellipsoid* (marked in pink on the screenshots below), which shows you the error proportions in X, Y, Z directions. The ideal situation is a sphere, when the errors in three directions are equal. If not, the long radius points to the direction where a larger error is introduced. For example, a well-overlapped, nadir image dataset will have the long radius pointing to the Z direction. However, if the errors in Z direction exceed 5 times those of X and Y directions, where none of your input data has gross errors, there might be a problem caused by short baseline matches.

Error ellipsoid showing if the marks also include wide-baseline pairs.

Short baseline clicks including error ellipsoid
Short-baseline marks only
Wide baseline clicks including error ellipsoid
Marks including wide baselines

2. Import the check points, making sure they are marked on the wide-baseline pairs

To assess the calibration (bundle adjustment) result, ground-surveyed check points are imported. These check points also need to be correctly marked in order to tell the software where they are.

Check points are not taken into account for their 3D locations as the GCPs, but they would be triangulated as manual tie points. The quality of the digital surface model (DSM), processed using only the GCPs was examined by comparing the height difference from the check points.

Two tables demonstrating calabration. The table on the left compares the tirangluated position and the inital position of checkpoints. The table on the right describes DMS by comparing the height difference with check points.
Calibration assessment by comparing the triangulated position and the initial position of the check points (left) and DSM assessment by comparing the height difference with check points (right).

For users who need an accurate map: you may assess the orthomosaic by checking the horizontal shifts of the check points. In this dataset, the shifts are all less than one pixel.

Orthomosaic output created from drone images and photogrammetry software
Orthomosaic created by aerial images and Pix4Dmapper drone mapping software

Conclusion: more overlap means more accuracy

Among the three different overlap projects, the highest overlap one Skip 0 gives the best results - however, all projects give less than one pixel of horizontal accuracy and less than three pixels of vertical accuracy.

Pix4Dmapper is capable of getting more contributions from wide-baseline matches, and higher overlap will ensure a better accuracy in your mapping output. To generate an accurate DSM and orthomosaic, you should capture nadir images with high degrees of image overlap, and remember to include wide-baseline pairs in both your GCP and check point marks. If you are not sure, always activate the error ellipsoid!

Although higher image overlap gives you better results in Pix4Dmapper, the processing time is also nearly proportional to the number of images. The project Skip 0 took two hours to finish the initial processing, while Skip 3 and Skip 5 only took 20 and 10 minutes for a similar level of accuracy. Take these factors into consideration to make sure you benefit the most from the software!

Digital surface model of the test area.
The digital surface model (DSM) of the test area created by Pix4Dmapper


Discover more solutions
Find out more about Pix4Dmapper

Related articles